Chapter 2 Hardware
V500 Series User’s Guide
36
The following table describes the front panel hardware.
Table 2 Front Panel Hardware
LABEL DESCRIPTION
1 Handset.
2 LCD (Liquid Crystal Display) screen.
3 Account keys Use these to select the SIP account you want to use. You can configure
up to four SIP accounts on the V500. The account keys are independent
of the line keys - you can use any SIP account with any line.
Note: You can select an account only when it has been
configured (use the Advanced Setting > SIP
Configuration LCD menus to configure an account).
4 Softkeys These keys’ functions depend on the screen currently displayed on the
LCD. A word or symbol displayed on the LCD above a softkey shows its
current function.
•If “Select” displays above a softkey, press the key to choose an entry
on the screen.
•If “Add” displays above a softkey, press the key to add a new entry to
the screen.
•If “Edit” displays above a softkey, press the key to change an
existing entry on the screen.
•If “Del” displays above a softkey, press the key to delete an entry
from the screen.
•If “Back” displays above a softkey, press the key to return to the
previous screen.
•If “Cancel” displays above a softkey when you are editing a field,
press the key to return to the previous screen without saving any
changes.
•If “<-” displays above a softkey when you are editing a field, press
the key to delete the character to the left of the cursor.
•If “.” displays above a softkey when you are editing a field, press the
key to enter a period.
5 Line keys Press these to select the phone line you want to use. The V500 has four
phone lines.
• If a line key’s LED is off, the line is not active.
• If a line key’s LED is on, the line is active.
• If a line key’s LED is blinking slowly, a call is on hold on that line.
• If a line key’s LED is blinking quickly, a call is incoming on that line.
6 Menu Press this to display the V500’s configuration menu. When the menu
displays, you can press this key again to exit the menu. The menu is not
accessible when a call is in progress.
7 Navigator Use this to move around the V500’s screens. Press to go up one line
in a menu, and press to go down one line. Press to move one
space to the right, and press to move one space to the left.
8 Phonebook Use this to display the list of contacts stored in the V500. You can add,
edit and delete phonebook entries from this screen.
