A SERVICE OF

logo

Open as PDF
next previous
Chapter 3 Tutorials
V500 Series User’s Guide
47
3.3 Configuring VoIP Options Automatically
Once you have established a network connection, the next thing you must do is configure the
V500 so that it can connect to a voice server. If your voice server uses auto provisioning, then
that server can automatically upload all the required VoIP configuration data directly to your
phone; all that is required on your end is entering the correct information as provided by your
network administrator or service provider.
To configure your phone automatically:
1 Open the
MENU > Advanced > Auto Provision screen. (You may be prompted to enter
the administrator password. The default is “1234”.)
2 Set up the appropriate options for your auto provisioning server. (These settings should
be provided by your network administrator or service provider.)
3 Your phone should momentarily update itself with its new VoIP settings.
Auto Provision
1 Protocol
2 Server Address
3 Port
4 Expire Time
5 Retry Time
Select Back