A SERVICE OF

logo

Open as PDF
next previous
V500 Series User’s Guide
161
CHAPTER 8
Introducing the Web
Configurator
8.1 Overview
This chapter describes how to access the V500’s web configurator and provides an overview
of its screens.
8.2 Accessing the Web Configurator
1 Make sure your hardware is properly connected and prepare your computer or computer
network to connect to the V500 (refer to the Quick Start Guide).
2
Launch your web browser.
3 Enter the V500’s IP address as the URL. The V500 is set to get an IP address
automatically. Use the System Info > IP Address LCD screen to find it out (see Section
6.3.2 on page 79).
" If the V500 is not connected to a network, use the management IP address.
The default management IP address is 192.168.5.1.
The following screen displays.
Figure 123 Password Screen