Chapter 2 Hardware
V500 Series User’s Guide
37
9 Action keys CONFERENCE Use this to set up a conference call between the
V500 and two other phones, or to split a
conference call you set up into two separate calls.
TRANSFER Use this to transfer a call to another phone.
HANG UP Use this to end a call.
HOLD Use this to put a call on hold. Press it a second time
to take the call off hold.
REDIAL Use this to dial the last number that was called from
the V500.
SEND Use this to start a call, once you have entered the
phone number.
10 Alphanumeric
keypad
Use these to enter numbers, letters and symbols. Use the # key to
switch between Number mode, Uppercase mode, Lowercase mode and
Symbol mode.
11 Microphone The microphone is active when the V500 is in speakerphone mode.
12 Volume keys Use the + key to increase the volume, and use the - key to decrease it.
• When you use the handset, these keys control the handset’s
listening volume.
• When you use the headset, these keys control the listening volume
on the V500’s headphone ( ) port.
• When you use the speakerphone, these keys control the internal
speaker volume.
Table 2 Front Panel Hardware (continued)
LABEL DESCRIPTION
