V500 Series User’s Guide
45
CHAPTER 3
Tutorials
3.1 Overview
These tutorials show you how to perform numerous functions of the V500. Even though they
make certain basic assumptions that may not match your actual configuration environment, the
foundation provided here should be sufficient to get you up and running as quickly as possible.
" For complete information on how to work with the LCD menu screens, see
Chapter 4 on page 61.
To get your V500 operational, you must:
• Set up a network connection (Section 3.2 on page 45)
• Set up a connection to your VoIP service provider (Section 3.3 on page 47)
3.2 Setting Up a Network Connection
The V500 is an IP phone. As such, you need to have an active network connection for it to
work. This allows it to connect to a voice server.
To establish a network connection:
1 For PPoE: Open the
MENU > Advanced > Network Setting screen, highlight the PPoE
(Off) option and press Select. Configure your PPPoE Username and Password.
PPPoE
1 Username
2 Password
Select Back
