A SERVICE OF

logo

Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
115
7.3.2.4.1 First / Second DNS - Edit
Press Edit in the 1st DNS or 2nd DNS screen. A screen similar to the following displays (this
example uses the 1st DNS screen).
Figure 67 LCD Menu: First / Second DNS - Edit
The following table describes the labels in this screen.
7.3.3 DHCP
Use DHCP to have the V500 get an IP address automatically from a DHCP server on the
network.
Select Advanced Setting > Network Settings. In the screen that displays, ensure that DHCP
is enabled.
" DHCP is enabled by default.
1st DNS Number
Current: 0.0.0.0
New:
Save . <- Cancel
Table 45 LCD Menu: First / Second DNS - Edit
LABEL DESCRIPTION
Current This is the subnet mask your V500 is configured to use.
New Enter the DNS server’s IP address in dotted decimal notation.
Mode Cycle through different character input modes using the # key.
Save Press this to save your changes.
. Press this to enter a period.
<- Press this to delete a character.
Cancel Press this to return to the previous screen without saving your settings.