Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
144
The following table describes the labels in this screen.
7.5 The Auto Provision Menus
Use these menus if you have an auto-provisioning server on the network. When auto-
provisioning is used, the V500 downloads its settings automatically from the auto-
provisioning server, meaning you do not have to input them manually.
Enable and select Advanced Setting > Auto Provision. The following screen appears.
Figure 105 LCD Menu: Auto Provision
The following table describes the labels in this screen.
Table 79 LCD Menu: First / Second Backup SIP Server
LABEL DESCRIPTION
SIP Server Address This is the IP address of the backup SIP server. See Section 7.4.4 on page
122 for information on how to configure this.
SIP Server Port This is the listening port on the backup SIP server. See Section 7.4.5 on
page 123 for information on how to configure this.
Register Address This is the IP address of the backup SIP register server. See Section 7.4.6
on page 125 for information on how to configure this.
Register Port This is the listening port on the backup SIP register server. See Section
7.4.7 on page 126 for information on how to configure this.
SIP Server Domain This is for domain name of the backup SIP server. See Section 7.4.8 on
page 128 for information on how to configure this.
Select Press this to choose the highlighted field in the menu.
Back Press this to return to the previous screen.
Auto Provision
1 Protocol
2 Server Address
3 Port
4 Expire Time
5 Retry Time
Select Back
Table 80 LCD Menu: Auto Provision
LABEL DESCRIPTION
Protocol Select this to see or edit the protocol the V500 uses to request and receive
auto-provisioning files.
Server Address Select this to see or edit the auto provisioning server’s IP address.
Port Select this to see or edit the auto-provisioning server’s port number.
