Chapter 11 SIP Account Setup
V500 Series User’s Guide
184
Expiration
Time
Keep the default value, unless your VoIP service provider tells you to change it.
Enter the number of seconds the SIP server should provide the message waiting
service each time the V500 subscribes to the service. Before this time passes, the
V500 automatically subscribes again.
Hot Line Configure this option to have the V500 automatically dial the Hotline Number
after the line is off the hook for the duration specified in the Delay Period option.
This is especially useful for dialing emergency numbers.
Enable Select this to enable the Hot Line feature.
Delay Period
before Hotline
Activated:
Enter the duration the phone can remain off the hook before automatically dialing
the hotline number. You can set the delay from 1 to 15 seconds.
Hotline
Number:
Enter the number to be dialed once the V500 has surpassed the delay period.
Call Forward
Enable Select this if you want the V500 to use the call forwarding rules you set up in the
VoIP > Phone Book > Call Forward screen.
RingBack Active
Enable Select this to turn the RingBack function on. When someone calls you, and the
line is busy, the caller is given the option to set an automatic RingBack. When you
finish your call, the V500 automatically calls the person who called you, and then
rings to alert you once the caller picks up.
MusicOnHold
Active
Enable Check this box if you want people to hear a customized recording when you put
them on hold. This function depends on your service provider.
PS (Presence
Server)
Server
Address
Enter your presence server IP address.
Server Port Enter your presence server port number.
Expiration
Time
Enter the number of seconds to wait before expiring a user’s presence setting on
the network.
Apply
Click this to save your changes.
Back Click this to return to the SIP Settings screen without saving your changes.
Table 107 VoIP > SIP > SIP Settings > Advanced Setup (continued)
LABEL DESCRIPTION
