Chapter 7 Wireless
VSG1435-B101 Series User’s Guide
107
7.4 MAC Authentication
This screen allows you to configure the ZyXEL Device to give exclusive access to
specific devices (Allow) or exclude specific devices from accessing the ZyXEL
Device (Deny). Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the
MAC addresses of the devices to configure this screen.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame
so a station cannot obtain the SSID through scanning using a site
survey tool.
Client Isolation Select this to keep the wireless clients in this SSID from
communicating with each other.
MBSSID/LAN
Isolation
Select this to keep the wireless clients in this SSID from
communicating with clients in other SSIDs or LAN devices.
Enhanced Multicast
Forwarding
Select this check box to allow the ZyXEL Device to convert wireless
multicast traffic into wireless unicast traffic.
Security Level
Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to
add security on this wireless network. The wireless clients which
want to associate to this network must have same wireless security
settings as the ZyXEL Device. After you select to use a security,
additional options appears in this screen.
Or you can select No Security to allow any client to associate this
network without any data encryption or authentication.
See Section 7.2.1 on page 99 for more details about this field.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 15 More AP: Edit
LABEL DESCRIPTION
