Chapter 21 IPSec
VSG1435-B101 Series User’s Guide
252
21.3 The IPSec Settings Screen
The following figure helps explain the main fields in the web configurator.
Figure 117 IPSec Summary Fields
Local and remote IP addresses must be static.
Click Security Settings > IPSec to open the Settings screen. This is a menu of
your IPSec tunnels.
Figure 118 Security Settings > IPSec > Settings
The following table describes the fields in this screen.
Table 86 Security Settings > IPSec > Settings
LABEL DESCRIPTION
Add New
Connection
Click this to configure a new VPN policy.
# This is the index number of the entry.
Status This field displays whether the VPN policy is active or not. A yellow bulb
signifies that this VPN policy is active. A gray bulb signifies that this VPN
policy is not active.
Connection
Name
This field displays the identification name for this VPN policy.
Remote
Gateway
This is the static WAN IP address or URL of the remote IPSec router.
Local Network
Local IP Address
My IP Address
Secure Gateway IP Address
Remote Network
Remote IP Address
Remote
IPSec Router
VPN Tunnel
