Chapter 2 The Web Configurator
VSG1435-B101 Series User’s Guide
40
Home
Networking
LAN Setup Use this screen to configure LAN TCP/IP settings, and other
advanced properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Routing Static Route Use this screen to view and set up static routes on the ZyXEL
Device.
Policy
Forwarding
Use this screen to configure policy routing on the ZyXEL Device.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use these screens to configure QoS policers.
Monitor Use this screen to view QoS packets statistics.
NAT Port
Forwarding
Use this screen to make your local servers visible to the outside
world.
Applications Use this screen to configure servers behind the ZyXEL Device.
Port Triggering Use this screen to change your ZyXEL Device’s port triggering
settings.
DMZ Use this screen to configure a default server which receives
packets from ports that are not specified in the Port Forwarding
screen.
ALG Use this screen to enable or disable SIP ALG.
Sessions Use this screen to limit the number of NAT sessions a single client
can establish.
DNS DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
IGMP General Use this screen to configure general IGMP proxy and IGMP packet
processing settings.
IGMP Filter Use this screen to control IGMP access.
IGMP ACL Use this screen to block or allow access to specific multicast
media channels.
Interface
Group
Use this screen to map a port to a PVC or bridge group.
Security Settings
Firewall General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add or remove predefined Internet services and
configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network
services.
MAC Filter Use this screen to block or allow traffic from devices of certain
MAC addresses to the ZyXEL Device.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION
