A SERVICE OF

logo

Open as PDF
next previous
Chapter 8 Home Networking
VSG1435-B101 Series User’s Guide
134
8.2 The LAN Setup Screen
Use this screen to set the Local Area Network IP address and subnet mask of your
ZyXEL Device. Click Network Settings > Home Networking to open the LAN
Setup screen.
Follow these steps to configure your LAN settings.
1 Enter an IP address into the IP Address field. The IP address must be in dotted
decimal notation. This will become the IP address of your ZyXEL Device.
2 Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed
otherwise it is best to leave this alone, the configurator will automatically compute
a subnet mask based upon the IP address you entered.
3 Click Apply to save your settings.
Figure 45 Network Settings > Home Networking > LAN Setup