Chapter 16 Firewall
VSG1435-B101 Series User’s Guide
226
16.4.1 Add/Edit an ACL Rule
Click Add New ACL Rule or the Edit icon next to an existing ACL rule in the
Access Control screen. The following screen displays.
Figure 97 Security Settings > Firewall > Access Control > Add/Edit
The following table describes the labels in this screen.
Table 69 Security Settings > Firewall > Access Control > Add/Edit
LABEL DESCRIPTION
General
Filter Name Enter a descriptive name of up to 16 alphanumeric characters, not
including spaces, underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-
only if you are editing the ACL rule.
Select Source
Device
Select the source device to which the ACL rule applies. If you select
Specific IP Address, enter the source IP address in the field below.
Source IP
Address
Enter the source IP address.
Select
Destination
Device
Select the destination device to which the ACL rule applies. If you
select Specific IP Address, enter the destiniation IP address in the
field below.
Destination IP
Address
Enter the destination IP address.
