Chapter 7 Wireless
VSG1435-B101 Series User’s Guide
99
7.2.1 No Security
Select No Security to allow wireless stations to communicate with the access
points without any data encryption or authentication.
Note: If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 25 Wireless > General: No Security
MBSSID/LAN
Isolation
Select this to keep the wireless clients in this SSID from communicating
with clients in other SSIDs or wired LAN devices through the ZyXEL
Device.
Select both Client Isolation and MBSSID/LAN Isolation to allow this
SSID’s wireless clients to only connect to the Internet through the ZyXEL
Device.
Enhanced
Multicast
Forwarding
Select this check box to allow the ZyXEL Device to convert wireless
multicast traffic into wireless unicast traffic.
Security Level
Security
Mode
Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add
security on this wireless network. The wireless clients which want to
associate to this network must have same wireless security settings as the
ZyXEL Device. When you select to use a security, additional options
appears in this screen.
Or you can select No Security to allow any client to associate this
network without any data encryption or authentication.
See the following sections for more details about this field.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 9 Network Settings > Wireless > General
LABEL DESCRIPTION
