Chapter 10 Quality of Service (QoS)
VSG1435-B101 Series User’s Guide
166
TCP ACK This field is available only when you select IP in the Ether Type field.
If you select this option, the matched TCP packets must contain the
ACK (Acknowledge) flag.
Exclude Select this option to exclude the packets that match the specified
criteria from this classifier.
DSCP Mark This field is available only when you select IP in the Ether Type field.
If you select Mark, enter a DSCP value with which the ZyXEL Device
replaces the DSCP field in the packets.
If you select Unchange, the ZyXEL Device keep the DSCP field in the
packets.
802.1P Mark Select a priority level with which the ZyXEL Device replaces the IEEE
802.1p priority field in the packets.
If you select Unchange, the ZyXEL Device keep the 802.1p priority
field in the packets.
VLAN ID If you select Remark, enter a VLAN ID number with which the ZyXEL
Device replaces the VLAN ID of the frames.
If you select Remove, the ZyXEL Device deletes the VLAN ID of the
frames before forwarding them out.
If you select Add, the ZyXEL Device treat all matched traffic untagged
and add a second VLAN ID.
If you select Unchange, the ZyXEL Device keep the VLAN ID in the
packets.
To Queue Index Select a queue that applies to this class.
You should have configured a queue in the Queue Setup screen
already.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 34 Class Setup: Add/Edit
LABEL DESCRIPTION
