Chapter 6 Broadband
VSG1435-B101 Series User’s Guide
87
6.2.2.1 Bridge
This screen displays when you select the Bridge mode.
Figure 22 Broadband: Add/Edit: Bridge Mode
DNS Select Dynamic if you want the ZyXEL Device use the DNS server
addresses assigned by your ISP.
Select Static if you want the ZyXEL Device use the DNS server
addresses you configure manually.
DNS Server 1 Enter the first DNS server address assigned by the ISP.
DNS Server 2 Enter the second DNS server address assigned by the ISP.
VLAN (These fields appear when the Type is set to VDSL or Ethernet)
Active Select this option to add the VLAN tag (specified below) to the outgoing
traffic through this connection.
802.1P IEEE 802.1p defines up to 8 separate traffic types by inserting a tag
into a MAC-layer frame that contains bits to define class of service.
Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic
through this connection. The greater the number, the higher the
priority level.
802.1Q Type the VLAN ID number (from 1 to 4094) for traffic through this
connection.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to exit this screen without saving.
Table 7 Broadband: Add/Edit: Routing Mode
LABEL DESCRIPTION
