A SERVICE OF

logo

Open as PDF
next previous
SN0054659-00 A 2-1
2 Command Usage
The command line interface (CLI) enables you to perform a variety of router
management tasks through an Ethernet or serial port connection. This section
describes the following:
Logging On to a SAN Router
Guest Account
Working with SAN Router Configurations
Logging On to a SAN Router
To log on to a router using Telnet, open a command line window on the
workstation and enter the Telnet command followed by the router IP address:
# telnet <ip_address>
A Telnet window opens prompting you for a login. Enter an account name and
password.
To log on to a switch through the serial port, configure the workstation port with the
following settings:
115200 baud
8-bit character
1 stop bit
No parity
Enter an account name and password when prompted.