4 – Command Reference
Command Syntax
4-14 SN0054659-00 A
S
Image
Updates the router’s firmware image and cleans up (removes) the image files in
the router’s /var/ftp directory.
Authority Admin session
Syntax image
cleanup
list
unpack [file]
Keywords cleanup
Removes all firmware image files in the router’s /var/ftp directory. You can
transfer these are files when updating the router’s firmware image.
list [file]
Displays a list of the firmware image files in the router’s /var/ftp directory.
unpack [file]
Unpacks the firmware image file specified in the [file] parameter and installs the
firmware image on the router. You must reboot the router to activate the new
firmware image.
Image cleanup command example:
QRouter (admin) #> image cleanup
Image list command example:
QRouter (admin) #> image list
isr-6142-2_1_1_0.bin
Image unpack command example:
QRouter (admin) #> image unpack isr-6142-2_1_1_0.bin
Unpack Completed. A reboot is required for the FW to take effect.
Do you wish to reboot the System at the current time (y/n): n
NOTE:
Use FTP to transfer an image file to the router’s /var/ftp directory.
