4 – Command Reference
Command Syntax
4-68 SN0054659-00 A
S
Show Presented iSCSI Targets command example:
QRouter #> show presented_targets iscsi
Presented Target Information
------------------------------
iSCSI Presented Targets
-------------------------
Name
iqn.2000-04.com.qlogic:isr6142:0.50001fe150069d20.50001fe150069d2c
IP 10.3.5.66
<MAPS TO>
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Name
iqn.2000-04.com.qlogic:isr6142:1.50001fe150069d20.50001fe150069d2c
IP 10.3.5.67
<MAPS TO>
WWNN 50:00:1f:e1:50:06:9d:20
WWPN 50:00:1f:e1:50:06:9d:2c
Name
iqn.2000-04.com.qlogic:isr6142:0.50001fe150011150.50001fe150011158
IP 10.3.5.66
<MAPS TO>
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58
Name
iqn.2000-04.com.qlogic:isr6142:1.50001fe150011150.50001fe150011158
IP 10.3.5.67
<MAPS TO>
WWNN 50:00:1f:e1:50:01:11:50
WWPN 50:00:1f:e1:50:01:11:58
