A SERVICE OF

logo

4 – Command Reference
Command Syntax
4-56 SN0054659-00 A
S
Show iSCSI
Displays iSCSI information for the specified port. If you do not specify the port, this
command displays both ports.
Authority None
Syntax show iscsi [port_num]
Keywords [port_num]
Specifies the number of the iSCSI port to display.
Examples Show iSCSI port command example:
QRouter (admin) #> show iscsi
iSCSI Port Information
------------------------
iSCSI Port 1
Port Status Enabled
Link Status Up
iSCSI Base Name
iqn.2004-08.com.qlogic:isr-6142.0608a00471.0
MAC Address 00-c0-dd-0c-8b-e2
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway IP Address 0.0.0.0
Firmware Revision No. 3.00.02.44
No. of Open Connections 0
Target TCP Port No. 3260
MTU Size Normal
Window Size 32768
Window Scaling Enabled
Window Scaling Factor 1
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
Header Digests Enabled
Data Digests Enabled
Max Burst 262144
Max First Burst 65536
VLAN Disabled
IPv6 Address 1 ::
IPv6 Address 2 ::