A SERVICE OF

logo

4 – Command Reference
Command Syntax
SN0054659-00 A 4-41
A
Set iSNS
Configures iSNS parameters for an iSCSI port.
Authority Admin session
Syntax set isns [port_num]
Keywords [port_num]
Specifies the number of the iSCSI port to be configured for iSNS.
Examples Set iSNS command example:
QRouter (admin) #> set isns 1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
Configuring iSNS iSCSI Port: 1
--------------------------------
iSNS (0=Enable, 1=Disable) [Disabled ] 0
iSNS Address (IPv4 or IPv6) [0.0.0.0 ]
fe80::21b:21ff:fe06:d517
TCP Port No. [3205 ]
All attribute values for Port 1 that have been changed will now be
saved.