4 – Command Reference
Command Syntax
4-52 SN0054659-00 A
S
Show FC
Displays Fibre Channel port information for the specified port. If you do not specify
the port, it displays both ports.
Authority None
Syntax show fc [port_num]
Keywords [port_num]
Specifies the number of the FC port to display.
Examples Show FC command example:
QRouter (admin) #> show fc
FC Port Information
---------------------
FC Port 1
Port Status Enabled
Link Status Up
Current Link Rate 2Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:0c:8b:e2
WWPN 21:00:00:c0:dd:0c:8b:e2
Port ID 02-02-ef
Firmware Revision No. 3.03.07
Frame Size 2048
Execution Throttle 64
Connection Mode Loop
Programmed Connection Option Loop Preferred
FC Port 2
Port Status Enabled
Link Status Up
Current Link Rate 2Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:0c:8b:e3
WWPN 21:00:00:c0:dd:0c:8b:e3
Port ID 02-06-ef
Firmware Revision No. 3.03.07
Frame Size 2048
Execution Throttle 64
Connection Mode Loop
Programmed Connection Option Loop Preferred
