4 – Command Reference
Command Syntax
4-42 SN0054659-00 A
S
Set Mgmt
Configures the router’s management port (10/100).
Authority Admin session
Syntax set mgmt
Examples Set Mgmt command example:
QRouter (admin) #> set mgmt
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to the MGMT
port.
IPv4 Interface (0=Enable, 1=Disable)[Enabled ]
IPv4 Mode (0=Static, 1=DHCP, 2=Bootp, 3=Rarp)[Dhcp ]
IPv6 Interface (0=Enable, 1=Disable)[Enabled ]
IPv6 Mode (0=Manual, 1=AutoConfigure)[Manual ] 1
All attribute values that have been changed will now be saved.
