2 – Command Usage
Working with SAN Router Configurations
2-4 SN0054659-00 A
S
Restore Router Configuration and Persistence
To restore the router’s configuration and persistent data:
1. Transfer the saved data from a workstation to the router by executing an
FTP utility on the workstation. The following text is an example of an FTP
transfer to put previously saved router configuration data on the router:
c:\>ftp 172.17.137.102
Connected to 172.17.137.102.
220 (none) FTP server (GNU inetutils 1.4.2) ready.
User (172.17.137.102:(none)): ftp
331 Guest login ok, type your name as password.
Password: ftp
230 Guest login ok, access restrictions apply.
ftp> bin
200 Type set to I.
ftp> put iSR-6142_FRU.bin
200 PORT command successful.
150 Opening BINARY mode data connection for
'iSR-6142_FRU.bin'.
226 Transfer complete.
ftp: 6168 bytes sent in 0.00Seconds
6168000.00Kbytes/sec.
ftp> quit
221 Goodbye.
2. Execute the fru restore CLI command (see “FRU” on page 4-10) to
update the router with the saved configuration data. The fru restore
command has the following two options:
Full restore – Restores all router configuration parameters, including IP
addresses, subnet masks, gateways, local/remote mappings, and all
other persistent data.
Partial restore – Restores only the local/remote mappings and
persistent data, such as discovered FC targets and iSCSI initiators.
