A SERVICE OF

logo

4 – Command Reference
Command Syntax
SN0054659-00 A 4-53
A
Show FcipRoutes
Displays FCIP route(s) configuration parameters.
Authority None
Syntax show fciproutes [link_id]
Keywords [link_id]
Specifies the number of the FCIP route to be displayed (1 or 2).
Examples Show FCIP routes command example:
QRouter (admin) #> show fciproutes
FCIP Route Information
------------------------
FCIP Route 1
FCIP Interfaces Status Enabled
FCIP Link Status Down
FC Port FC1
GE Port GE1
GE Link Status Up
IPv6 Link Local fe80::2c0:ddff:fe0c:8be2
IPv6 Remote Address fe80::21b:21ff:fe06:d517
MTU Size Normal
TCP Window Size 32768
Window Scaling Disabled
TCP Port No 3225
GE Port Speed Auto
FCIP Time Stamp Enabled
Error Detect TimeOut 1
Resource Allocate TimeOut 1
Bandwidth, Mbit/sec 1000
VLAN Disabled
FCIP SW Compression Disabled