Chapter 19 Configuration: VLAN
GS1900 Series User’s Guide
115
Figure 95 Configuration > VLAN > Voice VLAN > Global
The following table describes the labels in this screen.
19.4.2 The OUI Screen
Use this screen to view the OUI settings. The maximum number of entries is 16. Modifying the OUI
table will restart auto detection of OUI process. Click Configuration > VLAN > Voice VLAN >
OUI to open this screen.
Table 77 Configuration > VLAN > Voice VLAN > Global
LABEL DESCRIPTION
Global
State Select Enable to activate the global voice VLAN feature.
Voice VLAN ID Enter the global voice VLAN ID. It should be a unique VLAN ID in the system and cannot
equal each port PVID. It is a conflict in configuration if the value equals management VID,
MVR VID, PVID etc. The allowed range is 1 to 4095.
Cos/802.1p Displays the 802.1p packet priority field.
Remark Cos/
802.1p
Select to Enable the priority remark function for cos/802.1p.
Aging Time Enter the voice VLAN secure learning aging time. The allowed range is 10 to 10000000
seconds. It is used when security mode or auto detect mode is enabled. In other cases, it
will be based on hardware aging time. The actual aging time will be situated between the
[age_time; 2 * age_time] interval.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
