Chapter 19 Configuration: VLAN
GS1900 Series User’s Guide
118
19.4.5 The Port Edit Screen
Use this screen to edit the port(s) security state. Click Configuration > VLAN > Voice VLAN >
Port > Add/Edit to open this screen.
Figure 99 Configuration > VLAN > Voice VLAN > Port > Add/Edit
The following table describes the labels in this screen.
Port Displays the port index value.
State Displays the Voice VLAN port security mode state. When the function is enabled, all non-
telephonic MAC addresses in the Voice VLAN will be blocked for 10 seconds. Possible port
modes are:
• Enabled: Enable Voice VLAN security mode operation.
• Disabled: Disable Voice VLAN security mode operation.
Table 80 Configuration > VLAN > Voice VLAN > Port (continued)
LABEL DESCRIPTION
Table 81 Configuration > VLAN > Voice VLAN > Port > Add/Edit
LABEL DESCRIPTION
Port
Port Displays the port(s) index value.
State Select the Voice VLAN port security mode state. When the function is enabled, all non-
telephonic MAC addresses in the Voice VLAN will be blocked for 10 seconds. Possible port
modes are:
• Enabled: Enable Voice VLAN security mode operation.
• Disabled: Disable Voice VLAN security mode operation.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
