Chapter 7 Monitor: Port
GS1900 Series User’s Guide
54
7.2.3 Bandwidth Utilization
Utilization is the percentage of a network's bandwidth that is currently being consumed by network
traffic. Each vertical bar represents the highest utilization on a port, and can be either transmitted
(Tx) traffic or received (Rx) traffic during the last time interval in seconds.
Use this screen to view the Switch’s bandwidth utilization settings. Click Monitor > Port > Port >
Bandwidth Utilization to access this screen.
Figure 35 Monitor > Port > Port > Bandwidth Utilization
Each field is described in the following table.
etherStatsPkts256to511Octets This field displays the etherStatsPkts256to511Octets.
etherStatsPkts512to1023Octets This field displays the etherStatsPkts512to1023Octets.
etherStatsPkts1024to1518Octets This field displays the etherStatsPkts1024to1518Octets.
Table 24 Monitor > Port > Port > Port Counters (continued)
LABEL DESCRIPTION
Table 25 Monitor > Port > Port > Bandwidth Utilization
LABEL DESCRIPTION
Port Bandwidth
Utilization
1Gbps This field displays the 1Gbps.
100Mbps This field displays the 100Mbps.
10Mbps This field displays the 10Mbps.
Link down This field displays the link down.
Refresh period This field displays the refresh period.
IFG This field displays the IFG.
Tx Transmitted (Tx) traffic during the last time interval in seconds.
Rx Received (Rx) traffic during thetime interval in seconds.
