Chapter 26 Configuration: LLDP
GS1900 Series User’s Guide
158
26.2.5 The Local Information Edit Screen
Use this screen to configure the Port Edit settings. Click Configuration > LLDP > Local
Information > Edit to open this screen.
Capabilities
Supported
Capabilities Supported describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is disabled,
the capability is followed by (-).
Capabilities
Enable
Displays which capability is enabled.
Port ID Subtype Displays the Port ID Subtype.
MED Port Location
Edit Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Port Displays the index number of the LLDP port(s).
Coordinate Displays the location coordinate of the LLDP port(s).
Civic Address Displays the location of the civic address(es) in hexadecimal.
ECS ELIN Emergency Call Service (e.g. E911 and others), such as defined by TIA or NENA.
Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as
used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This
format consists of a numerical digit string, corresponding to the ELIN to be used for
emergency calling.
Table 120 Configuration > LLDP > Local Information (continued)
LABEL DESCRIPTION
