Chapter 17 Configuration: System
GS1900 Series User’s Guide
93
17.3.2 The SNTP Server Screen
In the navigation panel, click Configuration > System > Time > SNTP Server to display the
screen as shown.
Figure 74 Configuration > System > Time > SNTP Server
The following table describes the labels in this screen.
17.4 Information
The information option is used to set the following system information properties: system name,
system location, and system contact information.
Daylight Saving
Time Offset
Enter the daylight saving time offset value in minutes.
Start Date Select the start date of the daylight saving time period from the dropdown lists.
End Date Select the end date of the daylight saving time period from the dropdown lists.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 56 Configuration > System > Time (continued)
LABEL DESCRIPTION
Table 57 Configuration > System > Time > SNTP Server
LABEL DESCRIPTION
SNTP Server
Server Address Enter the address of the simple network time protocol (SNTP) server as an IP address
(192.168.0.1) or as a URL (www.zyxel.com).
Server Port Enter the port number of the SNTP server. The numeric value can be between 1 and 65535.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
