Chapter 18 Configuration: Port
GS1900 Series User’s Guide
97
The following table describes the labels in this screen.
18.3 EEE
Use this screen to view Switch port Energy-Efficient Ethernet (EEE) settings and select ports for
configuration. Click Configuration > Port > EEE > EEE to open this screen.
Figure 78 Configuration > Port > EEE > EEE
Table 60 Configuration > Port > Port > Edit
LABEL DESCRIPTION
Port Edit
Port List Displays the list of port index numbers that are being configured.
Port Name Enter a descriptive name that identifies this port. The length of the name can be up to 32
alpha-numerical characters.
Note: Due to space limitations, the port name may be truncated in some web configurator
screens.
State Select Enable to enable the ports or Disable to disable them.
Speed Select the speed of the Ethernet connection on this port. The choices are Auto, 10M,
100M, and 1000M.
Duplex Select the duplex mode of the Ethernet connection on this port. The choices are Auto, Full,
or Half.
FlowCtrl State Select Enable to allow the device to manage data flow or Disable to have no data flow
management. A concentration of traffic on a port decreases port bandwidth and overflows
buffer memory causing packet discards and frame losses. Flow Control is used to regulate
transmission of signals to match the bandwidth of the receiving port.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
