Chapter 26 Configuration: LLDP
GS1900 Series User’s Guide
161
26.2.6 The MED Network Policy Screen
Use this screen to view the MED Network Policy settings. Click Configuration > LLDP > MED
Network Policy to open this screen.
Figure 140 Configuration > LLDP > MED Network Policy
The following table describes the labels in this screen.
26.2.7 The MED Network Policy Add/Edit Screen
Use this screen to configure the Port Edit settings. Click Configuration > LLDP > MED Network
Policy > Add/Edit to open this screen.
Location ECS
ELIN
Emergency Call Service (e.g. E911 and others), such as defined by TIA or NENA.
Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as
used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This
format consists of a numerical digit string, corresponding to the ELIN to be used for
emergency calling.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 121 Configuration > LLDP > Local Information > Edit (continued)
LABEL DESCRIPTION
Table 122 Configuration > LLDP > MED Network Policy
LABEL DESCRIPTION
Network Policy Configuration
Add Click Add to create a new Network Policy Configuration entry.
No. Displays index of network policy.
Application Displays the Application type indicating the primary function of the application(s).
VLAN ID Displays the VLAN ID (VID) for the port as defined in IEEE 802.1Q-2003.
VLAN Tag Displays the VLAN Tag value as Tagged or Untagged.
L2 Priority Displays the L2 priority layer value.
DSCP Value Displays the DSCP Value.
Modify
Edit Click Edit to make changes to the entry.
Delete Click Delete to remove the entry.
