Chapter 25 Configuration: Spanning Tree
GS1900 Series User’s Guide
144
Figure 125 Configuration > Spanning Tree
The following table describes the labels in this screen.
25.2.2 The STP Port Screen
Use this screen to view the STP Port settings. Click Configuration > Spanning Tree > STP Port
to open this screen.
Table 107 Configuration > Spanning Tree
LABEL DESCRIPTION
Global
State Select to Enable or Disable the Spanning-Tree function.
BPDU Forward Select the bridge protocol data units forward (BPDU) option to be Flooding or Filtering.
Path Cost
Method
Select Short or Long as a Path Cost method.
Path cost is the cost of transmitting a frame on to a LAN through that port. It is
recommended that you assign this value according to the speed of the bridge. The slower
the media, the higher the cost - see Table 40 on page 112 for more information.
Version Select the type of spanning tree protocol to use. The following options are available:
•STP
•RSTP
•MSTP
Configuration
Name
Enter the name of the configuration in hexadecimal. The maximum number characters is
32.
Configuration
Revision
Enter the revision number of configuration. The number can be between 0 and 65535.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
