Chapter 32 Troubleshooting
GS1900 Series User’s Guide
222
I cannot see some of Advanced Application submenus at the bottom of the navigation
panel.
The recommended screen resolution is 1024 by 768 pixels. Adjust the value in your computer and
then you should see the rest of Advanced Application submenus at the bottom of the navigation
panel.
There is unauthorized access to my Switch via telnet, HTTP and SSH.
Click the Maintenance > Diagnostics screen to check for unauthorized access to your Switch. To
avoid unauthorized access, configure the secured client setting in the Configuration >
Management > Remote Access Control screen for telnet, HTTP and SSH (see Section 30.7 on
page 205). Computers not belonging to the secured client set cannot get permission to access the
Switch.
32.3 Switch Configuration
I lost my configuration settings after I restart the Switch.
Make sure you save your configuration into the Switch’s
nonvolatile memory each time you make changes. Click
Save at the top right corner of the web configurator to save the configuration permanently. See
also Section 4.3.1 on page 29 for more information about how to save your configuration.
