A SERVICE OF

logo

GS1900 Series User’s Guide 90
CHAPTER 17
Configuration: System
17.1 Overview
This section provides information for System in Configuration.
17.1.1 What You Can Do in this Chapter
The IP screen (Section 17.2 on page 90) displays IPv4 and IPv6 settings.
The Time screen (Section 17.3 on page 92) displays the system time and SNTP settings.
The Information screen (Section 17.4 on page 93) displays the system information.
17.2 IP
The Switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
17.2.1 The IPv4 Screen
Use this screen to view the IPv4 interface status and Switch’s management IPv4 addresses. Click
Configuration > System > IP > IPv4 to open this screen.
Figure 71 Configuration > System > IP > IPv4