Chapter 10 Maintenance
NetAtlas Workgroup User’s Guide
110
7 If you chose Restore, the switch automatically restarts when the configuration file
upload is complete.
8 Click Close to close this screen.
Figure 70 Maintenance: Configuration Backup/Restore
The following table describes the labels in this screen.
10.4 Load Factory Default
Follow the steps below to reset a switch configuration to the factory defaults.
1 Click Maintenance > Load Factory Default.
2 Select a switch from the list of devices shown.
Table 47 Maintenance: Configuration Backup/Restore
LABEL DESCRIPTION
Device Name This field displays the name of each IP DSLAM. Select an IP DSLAM to look
at statistics for one of its ports.
Device IP This field displays the corresponding IP address of the IP DSLAM.
Directory/File Name Type the path and file name of the configuration file you wish to restore to the
switch or backup to your computer in the Directory / File Name text box or
click Browse to locate it.
Save running-config
to configuration
This field is applicable when you select Backup.
Select the Save running-config to configuration text box to save the most
recently updated configuration to a file specified in the Directory/File Name
field.
Backup Click the Backup radio button to transfer the configuration file from your
switch to a computer.
Restore Click the Restore radio button to transfer the configuration file from your
computer to a switch.
Apply Click Apply to backup or restore the switch(es) configuration file.
Close Click Close to close this screen.
