A SERVICE OF

logo

Open as PDF
next previous
Chapter 10 Maintenance
NetAtlas Workgroup User’s Guide
111
3 Click Apply to clear all configuration information and return the switch to the factory
defaults.
This may take up to two minutes. If you want to access the switch web configurator
again, you may need to change the IP address of your computer to be in the same subnet
as that of the default switch IP address.
4 Click Close to close this screen.
Figure 71 Maintenance: Load Factory Defaults
10.5 Scheduled Network Element Configuration Backup
Perform configuration backups according to a schedule. Set the frequency, time and date of the
backup and the location where you want to backup the configuration file.
Click Maintenance > Scheduled NE Config Backup to display the configuration screen as
shown.
Figure 72 Maintenance: Scheduled NE Config Backup