Chapter 6 Template
NetAtlas Workgroup User’s Guide
81
Figure 42 Template: New IGMP Filter
The following table describes the labels in this screen.
Table 33 Template: New IGMP Filter
LABEL DESCRIPTION
IGMP Filter Name Type a name (up to 31 printable characters) to identify the IGMP filter profile.
Start Address Enter the starting multicast IP address for a range of multicast IP addresses to
which you want this IGMP filter profile to allow access.
End Address Enter the ending multicast IP address for a range of IP addresses to which you
want this IGMP filter profile to allow access.
If you want to add a single multicast IP address, enter it in both the Start IP and
End IP fields.
Add Click Add to create a new IGMP filter.
Clear Click Clear to remove the selected IGMP filter template.
IGMP Filter
Parameters
Index This is the number of the IGMP filter profile. Double-click a profile’s index number
to edit the profile.
Start Address This field displays the starting multicast IP address for a range of multicast IP
addresses to which you want this IGMP filter profile to allow access.
End Address This field displays the ending multicast IP address for a range of IP addresses to
which you want this IGMP filter profile to allow access.
Close Click Close to close this screen.
