Chapter 10 Maintenance
NetAtlas Workgroup User’s Guide
115
Figure 75 Maintenance: Scheduled Device Configuration Restore: Add/Modify
The following table describes the labels in this screen.
10.6.2 Schedule Content Screen
Use this screen to add one or more switches to a schedule for restoring configuration files. To
open this screen, click Add when you are creating a new schedule or editing an existing one.
Table 50 Maintenance: Scheduled Device Configuration Restore: Add/Modify
LABEL DESCRIPTION
Device List
Device Name This field displays the name of each switch in the schedule.
Device IP This field displays the corresponding IP address of the switch.
File This field displays the full path and name of the configuration file that will be restored
to the switch.
Add Click this to add one or more switches to the schedule.
Remove Select one or more switches, and click this to remove them from the schedule.
Schedule Time Specify when the configuration files should be restored. This is based on the current
date and time of the computer on which the EMS is running, not the current date and
time of the switch(es).
Schedule Name This field is grayed out unless you are creating a new schedule.
Type a name to create a new profile. You can use 1-31 alphanumeric characters,
underscores (_), or dashes(-). Spaces are not allowed.
User info for
Windows
Account Enter the user name for the Windows account.
Password Enter the password for the Windows account.
Apply Click this to save your changes.
Close Click this to discard any unsaved changes and close this screen.
