Interconnect management commands 172
— Product name
— Product part number
— Product version
— Product serial number
— Asset tag
— VLAN ID
o INTERCONNECT STATUS displays status information, UID state, and health state for the specified
interconnects.
o INTERCONNECT PORT MAP displays port mapping information for the specified interconnects.
o INTERCONNECT SESSIONS shows which users, if any, have serial console sessions in progress for
each interconnect.
o INTERCONNECT POWERDELAY shows the status and delay times for the specified interconnects.
o See also the SHOW INTERCONNECT INFO (on page 173) and SHOW INTERCONNECT LIST (on
page 175) commands.
• Access level/Bay level:
All
Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
• Example:
OA-0018FE27577F> show interconnect info 1
show interconnect info all
1. Ethernet
Product Name: HP VC FlexFabric 10Gb/24-Port Module
Width: Single
URL to Management interface: http://172.16.1.70/
In-Band IPv4 Address: 172.16.1.70
User Assigned Name:
Part Number: 571956-B21
Spare Part Number: [Unknown]
Serial Number: TW29460027
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
Internal Ethernet Route to OA: Enabled
Internal Serial Interface to OA: Present
Internal Serial Route to OA: Enabled
Serial Port Baud Rate: 115200
External Serial Port Interface: Absent
External Ethernet Interface: Absent
Manufacturer: HP
Firmware Version: 4.10
