HP SIM commands 47
HP SIM commands
ADD HPSIM CERTIFICATE
• Command:
ADD HPSIM CERTIFICATE <end marker> <\n> <certificate> <\n> <end marker>
• Description:
Adds an HP SIM certificate on the command line. To add the certificate:
a. Start with a string that does not appear within the certificate (the end marker).
b. Insert a newline character by pressing Enter.
c. Paste in the certificate.
d. Insert a newline character by pressing Enter.
e. Insert the end marker.
f. Issue the command by pressing Enter.
Failure to give a proper end marker before and after the certificate might cause the interface to wait for
the appropriate end marker indefinitely.
• Access level/Bay level:
OA administrator
• Restrictions:
o This command is only available in script mode.
o The certificate text cannot exceed 3071 characters.
o When the Onboard Administrator is operating in FIPS Mode, the minimum RSA key length is 2048
bits, and the signature hash algorithm must be SHA1, SHA-224, SHA-256, SHA-384, or SHA-512.
DOWNLOAD HPSIM CERTIFICATE
• Command:
DOWNLOAD HPSIM CERTIFICATE { <host> }
• Description:
o Downloads an HP SIM certificate from the specified IP address or fully-qualified DNS system name
(for example, nwest-office.acme.com).
o The <host> value can be an IPv4 address, an IPv6 address, or a DNS name.
o For IPv4, specify the address in the form ###.###.###.###, where each ### ranges from 0 to
255.
o For IPv6, specify the address in the form ####:####:####:####:####:####:####:####, where
each #### ranges from 0 to FFFF.
• Access level/Bay level:
