Enclosure network configuration commands 83
OA administrator, OA operator
• Restrictions:
None
DISABLE IPV6
• Command:
DISABLE IPV6
• Description:
Disables IPv6 protocol for management interfaces of all devices in the enclosure.
CAUTION: If you disable IPv6 in an IPv6-
only environment, you will lose your connection to the
Onboard Administrator GUI and any SSH sessions. To reestablish your connection, you must
perform the initial enclosure configuration via IPv4 networking, the Insight Display, or the
Onboard Administrator serial console interface. When disabling IPv6, all connections that
depend on the IPv6 protocol are closed.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
None
DISABLE IPV6DYNDNS
• Command:
DISABLE IPV6DYNDNS [<bay number> | ACTIVE | STANDBY]
• Description:
Disables Dynamic DNS using IPv6 for the specified bay, Active Onboard Administrator, or Standby
Onboard Administrator.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
None
DISABLE LOGIN_BANNER
• Command:
DISABLE LOGIN_BANNER
• Description:
Disables the login banner from appearing when the user attempts to log in to Onboard Administrator.
• Access level /Bay level:
OA administrator
