A SERVICE OF

logo

Open as PDF
next previous
GS2210 Series User’s Guide
112
CHAPTER 12
Filtering
12.1 Filtering Overview
This chapter discusses MAC address port filtering.
Filtering means sifting traffic going through the Switch based on the source and/or destination MAC
addresses and VLAN group (ID).
12.1.1 What You Can Do
Use the Filtering screen (Section 12.2 on page 112) to create rules for traffic going through the
Switch.
12.2 Configure a Filtering Rule
Use this screen to create rules for traffic going through the Switch. Click Advanced Application >
Filtering in the navigation panel to display the screen as shown next.
Figure 84 Advanced Application > Filtering