Chapter 38 Access Control
GS2210 Series User’s Guide
323
errdisable zyErrdisableDetect 1.3.6.1.4.1.890.1.15.3.24.4.1 This trap is sent when an error is
detected on a port, such as a loop occurs
or the rate limit for specific control
packets is exceeded.
zyErrdisableRecovery 1.3.6.1.4.1.890.1.15.3.24.4.2 This trap is sent when the Switch ceases
the action taken on a port, such as
shutting down the port or discarding
packets on the port, after the specified
recovery interval.
Table 159 SNMP System Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
Table 160 SNMP InterfaceTraps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
linkup linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet
link is up.
linkdown linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet
link is down.
autonegotiation zyPortAutonegotiationFailed 1.3.6.1.4.1.890.1.15.3.61.3.1 This trap is sent when an Ethernet
interface fails to auto-negotiate with
the peer Ethernet interface.
zyPortAutonegotiationFailedRe
covered
1.3.6.1.4.1.890.1.15.3.61.3.3 This trap is sent when an Ethernet
interface recovers from failing to
auto-negotiate with the peer
Ethernet interface.
lldp lldpRemTablesChange 1.0.8802.1.1.2.0.0.1 The trap is sent when entries in the
remote database have any updates.
Link Layer Discovery Protocol
(LLDP), defined as IEEE 802.1ab,
enables LAN devices that support
LLDP to exchange their configured
settings. This helps eliminate
configuration mismatch issues.
