Chapter 5 WAN Setup
P-2812HNU-51c User’s Guide
116
IPoA
This screen displays only when you set the DSL link type to IPoA for the ATM
interface and configure a WAN connection using the ATM interface.
Figure 45 WAN Configuration: IPoA
The following table describes the labels in this screen.
Obtain an IPv6
address
automatically
Select this option if you want to have the P-2812HNU-51c use the
IPv6 prefix from the connected router’s Router Advertisement (RA) to
generate an IPv6 address.
Obtain an
IPv6 address
from DHCPv6
server
Select this option if you want to get an IPv6 address from a DHCPv6
server.
The IP address assigned by a DHCPv6 server has priority over the IP
address automatically generated by the P-2812HNU-51c using the
IPv6 prefix from an RA.
Use the following
Static IPv6
address
Select this if you have a static IPv6 address.
WAN IPv6
Address
Enter the static IPv6 address provided by your ISP.
WAN IPv6
Subnet Prefix
Length
Enter the bit number of the IPv6 subnet mask provided by your ISP.
Static WAN
Gateway IPv6
Address
Enter the gateway IPv6 address provided by your ISP.
Back Click this button to return to the previous screen.
Next Click this button to continue.
Table 25 WAN Configuration: IPoA
LABEL DESCRIPTION
WAN IP Address Enter the static IP address provided by your ISP.
WAN Subnet
Mask
Enter the subnet mask provided by your ISP.
Table 24 WAN Configuration: IPoE
LABEL DESCRIPTION
