Chapter 2 Tutorials
P-2812HNU-51c User’s Guide
54
Follow the steps below to map traffic from LAN 1 to PVC 1 and traffic from LAN 2
and LAN 3 to PVC 2.
Note: Before configuring interface groups, make sure you are connected to LAN 4
which will not be in a group other than the default group. Otherwise, you need
to use the IP address of the new group to access the P-2812HNU-51c after you
apply the changes.
Note: You can also use policy forwarding to map traffic from a LAN port to a specific
PVC, but you need to enter the source IP address, port number and/or MAC
address of each packet that comes from the LAN port. See Chapter 16 on page
297 for more information.
1 Click Advanced Setup > Interface Group to open the following screen. Click
Add to create a new interface group GR1.
Table 4 DSL Connection Groups
GROUP LAN IP ADDRESS LAN INTERFACE WAN INTERFACE
GR1 192.168.2.x LAN1 ppp1 (0/33)
GR2 192.168.3.x LAN2, LAN3 atm2 (0/34)
