Chapter 16 Policy Forwarding
P-2812HNU-51c User’s Guide
298
The following table describes the labels in this screen.
16.2.1 Policy Forwarding Setup
Click the Add button in the Policy Forwarding screen. Use this screen to
configure the required information for a policy route.
Figure 153 Policy Forwarding: Add
The following table describes the labels in this screen.
Table 96 Advanced > Policy Forwarding
LABEL DESCRIPTION
Policy Name This is the name of the rule.
SourceIP This is the source IP address.
Protocol This is the transport layer protocol.
SourcePort This is the source port number.
SourceMAC This is the source MAC address.
Interface This is the WAN interface through which the traffic is routed.
Remove Click the icon to remove a rule from the P-2812HNU-51c. A window
displays asking you to confirm that you want to delete the rule.
Add Click this to create a new rule.
Table 97 Policy Forwarding: Add
LABEL DESCRIPTION
Policy Name Enter a descriptive name of up to 16 printable English keyboard
characters, including spaces.
Source IP
Address
Enter the source IP address.
Protocol Select the transport layer protocol (TCP or UDP).
Source Port Enter the source port number.
Source Mac
Address
Enter the source MAC address.
Use Interface Select a WAN interface through which the traffic is sent. You must have
the WAN interface(s) already configured in the WAN screens.
