Chapter 5 WAN Setup
P-2812HNU-51c User’s Guide
121
5.5.1.7 Configuration Summary
This read-only screen shows the current WAN connection settings.
Figure 49 WAN Configuration: Configuration Summary
The following table describes the labels in this screen.
Table 29 WAN Configuration: Configuration Summary
LABEL DESCRIPTION
Port / VPI / VCI This is the DSL port number, VPI and VCI for an ATM connection.
This displays N/A for an Ethernet WAN conenction or not available for
a PTM connection.
Connection Type This is the encapsulation method used by this connection.
Service Name This is the name of the service.
Service Category This is the ATM traffic class.
This field is blank for a PTM or Ethernet WAN conenction.
IP Address This shows whether the WAN IP address is assigned by the ISP,
manually configured or not configurable.
Service State This shows whether this service is active or not.
NAT This shows whether NAT is active or not for this connection.
NAT Type This shows the type of NAT the P-2812HNU-51c uses on this
connection.
Firewall This shows whether Firewall is active or not for this connection.
