Chapter 21 Remote Management
P-2812HNU-51c User’s Guide
333
21.3 The TR-064 Screen
TR-064 is a LAN-Side DSL CPE Configuration protocol defined by the DSL Forum.
TR-064 is built on top of UPnP. It allows the users to use a TR-064 compliant CPE
management application on their computers from the LAN to discover the CPE and
configure user-specific parameters, such as the username and password.
Click Advanced > Remote MGMT > TR064 to open the following screen.
Figure 168 TR-064
The following table describes the fields in this screen.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the P-2812HNU-51c,
this user name is used to authenticate the ACS.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the P-2812HNU-51c,
this password is used to authenticate the ACS.
Connection
Request URL
This shows the connection request URL.
The ACS can use this URL to make a connection request to the P-
2812HNU-51c.
Apply/Save Click this button to save your changes back to the P-2812HNU-51c.
Cancel Click Cancel to begin configuring this screen afresh.
Table 112 TR-069 (continued)
LABEL DESCRIPTION
Table 113 TR-064
LABEL DESCRIPTION
Enanble TR064 Select the check box to activate management via TR-064 on the LAN.
Apply Click this button to save your changes back to the P-2812HNU-51c.
