Chapter 7 Wireless LAN
P-2812HNU-51c User’s Guide
162
The following table describes the labels in this screen.
7.5 The More AP Screen
This screen allows you to enable and configure multiple wireless networks on the
P-2812HNU-51c.
Click Network > Wireless LAN > More AP. The following screen displays.
Figure 67 Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Table 40 Wireless LAN > MAC Filter > Add
LABEL DESCRIPTION
MAC
Address
Enter the MAC addresses of the wireless devices that are allowed or denied
access to the P-2812HNU-51c in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.
Back Click this to return to the previous screen without saving changes.
Apply Click this to save your changes and go back to the previous screen.
Table 41 Network > Wireless LAN > More AP
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Active Select the check box to activate an SSID profile.
SSID An SSID profile is the set of parameters relating to one of the P-
2812HNU-51c’s BSSs. The SSID (Service Set IDentifier) identifies the
Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When
a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
Security This field indicates the security mode of the SSID profile.
Modify Click the Edit icon to configure the SSID profile.
